3 reasons why we use Clipper ship “Noach” as an inspiration for the prototype500.
Published: 23rd January 2020
Image:
Author: Jorne Langelaan

1. Following the tradition

Instead of starting from scratch we wanted to choose a design which would represent the “Great days of sail”.

This to continue the design process of sailing cargo ships where it was left. So, we wanted to choose an existing vessel.

Built in 1857, Noach was definitely built in the “Great days of sail”.

2. Size

We wanted a ship large enough to be economically viable, but as small as possible to launch more ships with a given capital. Preferably below 500 gross tonnage to be non-SOLAS. If possible, below 40-meter load line to have easier access to sailing ship crew. But with enough depth of hold, to still have sufficient room for a tween deck (for accommodation) and a hold with good space for cargo.

I have to admit we had to very slightly, scale down Noach, to be below 500 gross tonnage and 40-meter waterline. However, the resulting hull still has plenty of depth of hold for a tween deck, and a very good beam for sail-carrying capacity.

3. Speed

We wanted to base the design on a ship with a proven track record of fast passage making. The Noach was for her size one of the fastest clipper ships, and logs from many of her passages are well documented. For example:

A voyage in 1861 from the Netherlands to Indonesia in 66 days and back in 78 days.

A voyage in 1863 on the same route: 71 days out and 66 days back.

And again in 1866, she made a record voyage of 65 days to Indonesia.

Captain Jorne Langelaan

Founder and CEO of EcoClipper

Video: Sailing cargo vessel at anchor, Dunbar UK.

Video: Sailing cargo vessel at anchor, Dunbar UK.

De Tukker: A 1912 coastal trader turned sail training vessel. Now part of the EcoClipper fleet, she sails cargo and travellers across seas.
De Tukker: A 1912 coastal trader turned sail training vessel. Now part of the EcoClipper fleet, she sails cargo and travellers across seas.

read more
Press Release: Wind transport ready for the next step! 

Press Release: Wind transport ready for the next step! 

Today the sailing freighter “De Tukker” returned from her maiden voyage.This journey started a few weeks ago in Amsterdam and took her through various European ports to Portugal and back to the Netherlands. Along the way, a mixed load was transported in a sustainable manner. The ship is propelled by sails and can therefore sail emission-free, even over long distances.

read more

Pin It on Pinterest